Infrastructure | Accurate Engineers

Manufacturing Capability

We Are Associated With Reputed & Qualified Fabricators for fabrication and powder coating process. Manufacturing facility including a full sheet metal shop with a CNC machine , Cutter, plus shearing, braking and welding facilities.

Cutting And Bending Machine

The Fabrication shop is equipped with Hydraulic bending and sheering machine, power press, MIG Welding machine etc. and lot of dies & fixtures to make cutouts in panel. The process of welding is also subjected to similar quality control so that the internal structure and rigidity of the panel is not compromised.

Tank coating processing plant

The Panel Process in 1. Degreasing Bath, 2.Water Rinse, 3.Derusting Bath, 4.Water Rinse, 5.Phospating Bath, 6. Water Rinse, 7. Passivation Bath then baked in the oven at a temperature of 240 c for half an hour. The oven provides the panel  with  more durability and also helps in provision of longevity.

Assembly And wiring

Specious assembly & wiring shop can cater simultaneous assembly requirement of number of panels together with best avilable tools & tackels for the job. for better quality/efficiency most sophisticated and latest machineries for Busbar assembly and wiring works.

Performance Tested

When The Panel is ready the outgoing quality control on the panel will be done. in this mainly H.V test and meggar test is performed on the panel along with functional test for specific requirement and interlock. standard procedure from point to point checks  of wiring  diagram and continuty checks in wiring. we routinely perform schematic logic , device functionality and test before we ship to you.  


Quick Enquiry